How do I use my Aqua Fizz?

Want to learn more about the correct way get bubbling with your Aqua Fizz? Check out the below guide, How To video, and user manual.


Follow the steps below to get sparkling with your Aqua Fizz Sparkling Water Maker:

  1. Begin by filling your glass carafe with cold water up to the fill line. Do not add anything to the carafe besides water before carbonating.
  2. Open the carbonating head by turning the lever to the right. The carbonating head will rise automatically.
  3. Tilt the glass carafe flask forward, insert the glass carafe, and return the glass carafe flask to the upright position. There is a removable ring inside the carbonating bottle flask to hold your glass carafe.
  4. Push the carbonating head down, ensuring the carbonating tube goes inside the glass carafe. While holding the carbonating head down, turn the flask lever to the left to the locked position.
  5. Carbonate by pushing down firmly on the carbonating button for around 2 seconds, releasing, and repeating -- 3 times for light fizz, 5 times for strong fizz, and more for extra strong fizz.
  6. When you've reached the right carbonation level, gently unlock the the carbonating head by turning the lever to the right.
  7. Enjoy your bubbles!

Click here to see the Aqua Fizz user manual.

Questions? Contact us via email or phone at 800-763-2258.

How do I install the cylinder in my Aqua Fizz?

Need help installing your cylinder? Check out the guide below for instructions.

*Please note that the 130L cylinder (discontinued) is not compatible with your Sparkling Water Maker.

Follow the steps below to make sure your cylinder is properly installed in your Aqua Fizz Sparkling Water Maker:

  1. Place the cylinder on a flat sturdy surface in an upright position and remove the seal and cap by twisting it counter-clockwise. Make sure to remove the carbonating bottle if it is installed in the Sparkling Water Maker.
  2. With the Sparkling Water Maker in an upright position on a flat, sturdy surface, remove the back cover by pressing the release button downwards and pulling the cover away from the body of the Sparkling Water Maker.
  3. Set the back cover aside.
  4. Gently tip the Sparkling Water Maker forward and insert the cylinder into the back. First insert the base of the cylinder followed by the body and then tilt it towards your Sparkling Water Maker.
  5. Screw the cylinder counter-clockwise while applying gentle pressure until it is firmly held in place. Do not use tools and make sure the cylinder is secured in its place.
  6. Replace the back cover so that it clicks into place.
  7. Enjoy your bubbles!

Questions? Contact us via email or phone at 800-763-2258.

How can I tell if my Aqua Fizz is out of gas?

Not sure if your CO2 cylinder is empty?

  • Make sure the cylinder is tight enough and retighten if necessary by twisting it to the right.
  • If you're still not getting enough bubbles and if you don't hear a sputtering sound when you press the carbonating button, you may be out of gas.* You can get a new cylinder through our online exchange program or a participating retail location.

*In 2020, we upgraded the Aqua Fizz Sparkling Water Maker with a new, silent valve. In these Sparkling Water Makers, it is normal to not hear a sputtering sound and is not an indication of the amount of CO2 left in the cylinder.

Still not sure if your carbonating cylinder is out of gas? Check out the guide below.

Questions? Contact us via email or phone at 800-763-2258.
How can I be sure the bottle on my Aqua Fizz is in the right position?

It's easy! The white carbonating tube should go inside the glass carafe when the carbonating head is pushed down.

Check out the guide below for further instructions.

Questions? Feel free to contact us via email or phone at 800-763-2258.

How do I clean my Aqua Fizz?

Taking care of your Sparkling Water Maker is super easy! You can use a mild liquid dish soap and a soft damp cloth to gently clean your Aqua Fizz Sparkling Water Maker.

Check out the guide below for more cleaning and handling instructions.

Questions? Contact us via email or phone at 800-763-2258.

How do I replace my Aqua Fizz gas cylinder?

Out of bubbles? Check out the guide below for help replacing your CO2 cylinder.

Follow the steps below to replace the empty cylinder on your Aqua Fizz Sparkling Water Maker:

  • Place the cylinder on a flat sturdy surface in an upright position and remove the seal and cap by twisting it counter-clockwise. Make sure to remove the carbonating bottle if it is installed in the Sparkling Water Maker.
  • With the Sparkling Water Maker in an upright position on a flat, sturdy surface, remove the back cover by pressing the release button downwards and pulling the cover away from the body of the Sparkling Water Maker.
  • Set the back cover aside.
  • Gently tip the Sparkling Water Maker forward and unscrew the empty CO2 cylinder by twisting it clockwise. Do not use tools.
  • Place your empty cylinder aside and take out your replacement cylinder.
  • With the Sparkling Water Maker tipped forward, insert the new cylinder into the back. First insert the base of the cylinder followed by the body and then tilt it towards your Sparkling Water Maker.
  • Screw the cylinder counter-clockwise while applying gentle pressure until it is firmly held in place. Make sure the cylinder is secured in its place.
  • Reinstall the back cover by fitting the upright tab at the bottom into the rear slot at the base of the Sparkling Water Maker. Then push the cover into place onto the back of the Sparkling Water Maker.
  • Save your empty cylinder so you can swap it for a gas refill.
  • Enjoy your bubbles!

Questions? Contact us via email or phone at 800-763-2258.

How do I add flavor to sparkling water I made using my Aqua Fizz?

Want to elevate your sparkle? Check out the guide below to learn how to use our sparkling drink mixes. 

Remember

Always fizz water before adding any flavor.

The guide above contains instructions for adding flavor:

Sparkle a bottle of fresh, cold water with your Sparkling Water Maker and select your favorite sparkling drink mix. We offer Classic syrups, Diet syrups, Fruit Drops, Organic Soda Press, and Fruits syrups.

To add sparkling drink syrups:
  • Use the indicated lines on the cap of the flavor bottle to choose a regular or light sweetness level.
  • Tilt the carbonating bottle at an angle and pour the flavor into your sparkling water.
  • Close the bottle with the fizz-preserving cap and shake gently to mix.
  • Enjoy your bubbles!

To add Soda Press sparkling drink mixes:

  1. Add 2 tbsp (30 mL) of the Soda Press syrup to about a 2/3 cup (170 mL) of sparkling water. You can adjust the amount of syrup you add according to your taste.
  2. Enjoy your bubbles!

To add Fruit Drops:

  1. Take approximately half a teaspoon of your chosen flavor to use with one liter of sparkling or still water.
  2. Tilt the carbonating bottle at an angle and add the fruit drops.
  3. Enjoy your bubbles!

To add bubly drops™:

  1. Take approximately ¾ of a teaspoon of your chosen flavor to use with one liter of sparkling water.
  2. Gently shake your carbonating bottle to mix the drops™:
  3. Enjoy your bubbles!
Questions? Contact us via email or phone at 800-763-2258.
How to use video: How do I use my Aqua Fizz?

Need assistance in learning how to use your Sparkling Water Maker? Take a look at this video and you'll be up and bubbling right away!

How do I carbonate water with my Aqua Fizz ?

Let's get you bubbling! Check out the guide below to begin.

  1. Begin by filling your glass carafe with cold water up to the fill line. Do not add anything to the carafe besides water before carbonating.
  2. Open the carbonating head by turning the lever to the right. The carbonating head will rise automatically.
  3. Tilt the glass carafe flask forward, insert the glass carafe, and return the glass carafe flask to the upright position.
  4. Push the carbonating head down, ensuring the carbonating tube goes inside the glass carafe. While holding the carbonating head down, turn the flask lever to the left to the locked position.
  5. Carbonate by pushing down firmly on the carbonating button for around 2 seconds, releasing, and repeating -- 3 times for light fizz, 5 times for strong fizz, and more for extra strong fizz.
  6. When you've reached the right carbonation level, gently unlock the carbonating head by turning the lever to the right.
  7. Enjoy your bubbles!

Questions? Contact us via email or phone at 800-763-2258.

What is the ring inside the carbonating bottle flask of my Aqua Fizz?

There is a ring inside the carbonating bottle flask of your Aqua Fizz Sparkling Water Maker to hold your glass carafe. The ring is removable and can be taken out to clean. Just make sure to insert it back in the center of the flask before carbonating.

Ring_Inside_Bottle.png