One Touch

Let's get you bubbling! Check out the below guide, How To video, and user manual.

Can't quite figure out how to connect the electrical cord on your One Touch Sparkling Water Maker? Take a quick look at this guide and let us help you get to some delicious bubbles!

Follow the steps below to properly connect the electrical cord on your Sparkling Water Maker:

1. Securely plug the cord into the base of your Sparkling Water Maker, ensuring the cord runs through the slots in the base.
2. Insert the plug into a wall outlet. The buttons will light up on your Sparkling Water Maker. Make sure to only use an original SodaStream power adapter.

Questions? Contact us via email or phone at 800-763-2258.

Need help installing your cylinder? Check out the guide below for instructions.

*Please note that the 130L cylinder (discontinued) is not compatible with your Sparkling Water Maker.

Follow the steps below make sure your cylinder is properly installed in your One Touch Sparkling Water Maker:

1. Place the cylinder on a flat sturdy surface in an upright position and remove the seal and cap by twisting it counter-clockwise. Make sure to remove the carbonating bottle if it is installed in the Sparkling Water Maker.
2. With the Sparkling Water Maker in an upright position on a flat, sturdy surface, remove the back cover by pressing on the top and pulling it away from the body of the Sparkling Water Maker.
3. Set the back cover aside.
4. Gently tip the Sparkling Water Maker forward and insert the cylinder into the back. First insert the base of the cylinder followed by the body and then tilt it towards your Sparkling Water Maker.
5. Screw the cylinder counter-clockwise while applying gentle pressure until it is firmly held in place. Do not use tools and make sure the cylinder is secured in its place.
6. Reinstall the back cover by fitting the upright tab at the bottom into the rear slot at the base of the Sparkling Water Maker. Then push the cover into place onto the back of the Sparkling Water Maker.
7. Enjoy your bubbles!

Questions? Contact us via email or phone at 800-763-2258.

Not sure if your CO2 cylinder is empty?

• Make sure the cylinder is tight enough and retighten if necessary by twisting it to the right.
• If you're still not getting enough bubbles and if you don't hear a sputtering sound when you press the carbonating button, you may be out of gas. You can get a new cylinder through our online exchange program or a participating retail location.

Still not sure if your carbonating cylinder is out of gas? Check out the guide below.

It's easy! Once inserted properly, the Snap-Lock will catch the bottle and hold it in a vertical position suspended above the base.

Check out the guide below for further instructions.

Taking care of your Sparkling Water Maker is super easy! You can use a mild liquid dish soap and a soft damp cloth to gently clean your One Touch Sparkling Water Maker.

Do not use abrasive cleaners or sharp tools to clean.

Check out the guide below for more cleaning and handling instructions.

Questions? Contact us via email or phone at 800-763-2258.

Want to elevate your sparkle? Check out the guide below to learn how to use our sparkling drink mixes. 

The guide above contains instructions for adding flavor:

Out of bubbles? Check out the guide below for help replacing your CO2 cylinder.

Follow the steps below to replace the empty cylinder on your One Touch Sparkling Water Maker:

• Place the cylinder on a flat sturdy surface in an upright position and remove the seal and cap by twisting it counter-clockwise. Make sure to remove the carbonating bottle if it is installed in the Sparkling Water Maker.
• With the Sparkling Water Maker in an upright position on a flat, sturdy surface, remove the back cover by pressing on the top and pulling it away from the body of the Sparkling Water Maker.
• Set the back cover aside.
• Gently tip the Sparkling Water Maker forward and unscrew the empty CO2 cylinder by twisting it clockwise. Do not use tools.
• Place your empty cylinder aside and take out your replacement cylinder.
• With the Sparkling Water Maker tipped forward, insert the new cylinder into the back. First insert the base of the cylinder followed by the body and then tilt it towards your Sparkling Water Maker.
• Screw the cylinder counter-clockwise while applying gentle pressure until it is firmly held in place. Make sure the cylinder is secured in its place.
• Reinstall the back cover by fitting the upright tab at the bottom into the rear slot at the base of the Sparkling Water Maker. Then push the cover into place onto the back of the Sparkling Water Maker.
• Save your empty cylinder so you can swap it for a gas refill.
• Enjoy your bubbles!

Need assistance in learning how to use your Sparkling Water Maker? Take a look at this video and you'll be up and bubbling right away!

Let's get you bubbling! Check out the guide below to begin.

Follow the steps below to get sparkling with your One Touch Sparkling Water Maker:

1. Begin by filling your carbonating bottle with cold water up to the fill line. Do not add anything to the bottle besides water before carbonating.
2. Pull the bottle rest towards you until a click sound is heard.
3. Insert the carbonating bottle into the Snap-Lock by pushing the bottle up and back. The Snap-Lock will hold the bottle in a vertical position suspended above the base.
4. Press one of the three buttons to achieve your desired carbonation. Press the left button (one drop) for light fizz, the middle button (two drops) for medium fizz, and the right button (three drops) for strong fizz.
5. When you've reached the right carbonation level, gently pull the bottle towards you until it reaches its fully forward position and remove.
6. Enjoy your bubbles!

Questions? Contact us via email or phone at 800-763-2258.