How do I use my Jet?

Want to learn more about the correct way get bubbling with your Jet? The below guide, How To video, and user manual can help.

 

Follow the steps below to get bubbling with your Jet:

  • Begin by filling your carbonating bottle with cold water up to the fill line. Remember to always fizz water before adding any flavor.
  • Press on the tilt lever and insert the bottle by turning it to the right (counter clockwise), into the Sparkling Water Maker.
  • Push down firmly on the carbonating button for 1 second, release, and repeat -- 3 presses will produce a standard fizz, additional presses will produce a stronger fizz.
  • When you've reached the right carbonation level, push the tilt lever and turn the carbonating bottle to the left (clockwise) to remove it.
  • Enjoy your bubbles!

Click here to see the Jet user manual.

Questions? Contact us via email or phone at 800-763-2258.

How do I install the cylinder in my Jet?

Need help installing your cylinder? We can help.

*Please note that the 130L cylinder has been discontinued.

Follow these steps to install your new cylinder:

    1. Place the cylinder on a flat sturdy surface in an upright position and remove the seal and cap by twisting it counter-clockwise. Make sure to remove the carbonating bottle if it is installed in the Sparkling Water Maker.
    2. With the Sparkling Water Maker in an upright position on a flat, sturdy surface, remove the back cover by pressing on the buttons on the sides and pulling it away from the body of the Sparkling Water Maker.
    3. Set the back cover aside.
    1. Gently tip the Sparkling Water Maker forward and insert the cylinder into the back. First insert the base of the cylinder followed by the body and then tilt it towards your Sparkling Water Maker.
    2. Screw the cylinder to the right (counter clockwise) while gently raising the cylinder until it is firmly held in place. Do not use tools and make sure the cylinder is secured in its place.
    3. Replace the back cover by inserting the tab on the bottom of the back cover into the hole on the base of the back of the Sparkling Water Maker.
    4. Get ready to carbonate!

Questions? Contact us via email or phone at 800-763-2258.

How can I tell if my Jet is out of gas?

Not sure if your CO2 cylinder is empty?

  • Make sure the cylinder is tight enough and retighten if necessary by twisting it to the right. Do not use tools.
  • If you're still not getting enough bubbles and if you don't hear a sputtering sound when you press the carbonating button, you may be out of gas. You can get a new cylinder through our online exchange program or at a participating retail location.

Still not sure if your carbonating cylinder is out of gas? We can help.

Questions? Contact us via email or phone at 800-763-2258.
How can I be sure the bottle on my Jet is in the right position?

It's easy! Once you have inserted the bottle correctly by twisting it to the right, there is a small gap between the carbonating bottle and the base.

The guide below has more information.

Questions? Feel free to contact us via email or phone at 800-763-2258.

How do I clean my Jet?

Taking care of your Sparkling Water Maker is super easy! You can use a mild liquid dish soap and a soft damp cloth to gently clean your Jet Sparkling Water Maker, including the nozzle.

Do not use abrasive cleaners or sharp tools to clean.

Questions? Contact us via email or phone at 800-763-2258.
How do I replace my Jet gas cylinder?

Out of bubbles? We can help replace your CO2 cylinder.

Follow the steps below to replace your empty carbonating cylinder:
  1. Place the cylinder on a flat sturdy surface in an upright position and remove the seal and cap by twisting it counter-clockwise. Make sure to remove the carbonating bottle if it is installed in the Sparkling Water Maker.
  2. With the Sparkling Water Maker in an upright position on a flat, sturdy surface, remove the back cover by pressing on the buttons on the sides and pulling it away from the body of the Sparkling Water Maker.
  3. Set the back cover aside.
  4. Remove the empty CO2 cylinder by twisting it to the left (clockwise). Do not use tools.
  5. Place your empty cylinder aside and take out your replacement cylinder.
  6. Gently tip the Sparkling Water Maker forward and insert the cylinder into the back. First insert the base of the cylinder followed by the body and then tilt it towards your Sparkling Water Maker.
  7. Screw the cylinder to the right while gently raising the cylinder until it is firmly held in place. Do not use tools and make sure the cylinder is secured in its place.
Questions? Contact us via email or phone at 800-763-2258.
How do I add flavor to sparkling water I made using my Jet?

Want to elevate your sparkle? Learn how to use our sparkling drink mixes. 

Remember

Always fizz water before adding flavor.

Adding flavor is easy:

Sparkle a bottle of fresh, cold water with your Sparkling Water Maker and select your favorite sparkling drink mix. We offer Classic syrups, Diet syrups, Fruit Drops, Organic Soda Press, and Fruits syrups.

To add sparkling drink syrups:
  • Use the indicated lines on the cap of the flavor bottle to choose a regular or light sweetness level.
  • Tilt the carbonating bottle at an angle and pour the flavor into your sparkling water.
  • Close the bottle with the fizz-preserving cap and shake gently to mix.
  • Enjoy your bubbles!

To add Soda Press sparkling drink mixes:

  1. Add 2 tbsp (30 mL) of the Soda Press syrup to about a 2/3 cup (170 mL) of sparkling water. You can adjust the amount of syrup you add according to your taste.
  2. Enjoy your bubbles!

To add Fruit Drops:

  1. Take approximately half a teaspoon of your chosen flavor to use with one liter of sparkling or still water.
  2. Tilt the carbonating bottle at an angle and add the fruit drops.
  3. Enjoy your bubbles!

To add bubly drops™:

  1. Take approximately ¾ of a teaspoon of your chosen flavor to use with one liter of sparkling water.
  2. Gently shake your carbonating bottle to mix the drops™:
  3. Enjoy your bubbles!
Questions? Contact us via email or phone at 800-763-2258.
How to use video: How do I use my Jet?

Need assistance in learning how to use your Sparkling Water Maker? Take a look at this video and I am sure you will be up and bubbling right away!

Questions? Contact us via email or phone at 800-763-2258.

How do I carbonate water with my Jet?

Let's get you bubbling! Check out the guide below to begin.

It's easy to get sparkling with your Fizzi Sparkling Water Maker:

  1. Begin by filling your carbonating bottle with cold water up to the fill line. Remember to always fizz water before adding any flavor.
  2. Press on the tilt lever and insert the bottle by turning it to the right (counter clockwise), into the Sparkling Water Maker.
  3. Push down firmly on the carbonating button for 1 second, release, and repeat -- 3 presses will produce a standard fizz, additional presses will produce a stronger fizz.
  4. When you've reached the right carbonation level, push the tilt lever and turn the carbonating bottle to the left (clockwise) to remove it.
  5. Enjoy your bubbles!

Questions? Contact us via email or phone at 800-763-2258.

Where can I see the Jet user manual?

Do you need to learn more about the correct way get bubbling with your Jet Sparkling Water Maker? Our Jet user guide is very helpful.